KIMBERLY REED
Rock Hill,NC
Summary
Skilled Assembly Technician with experience in the manufacturing industry. Background includes assembling high-volume products using strong multitasking skills and organized nature to complete fast-paced, high-quality work. Strong technical and mechanical skills gained during 17-year career.
Overview
18
18
years of professional experience
1
1
Certification
Work History
Assembly Technician III
Bosch Rexroth Corporation
09.2022 - Current
- Enhanced product quality through meticulous inspection of assembled parts and adherence to guidelines.
- Executed entire assembly process by accurately interpreting work instructions, work orders, drawings, or blueprints.
- Cleaned, lubricated and adjusted parts and components, keeping parts fully functional.
- Built different Lifts and module, packed parts in accordance with detailed packing specifications.
- Assemble different type of belts and motors.
- Read and interpreted blueprints and drawings to assemble parts and products.
- Tested finished products for compliance with tolerances and overall quality.
Assembly Tech III - Assembler/ Packer
Chemring Detection Systems
11.2018 - 09.2022
- Responsible for the packing and assembly
- Operate machine to cut wires according to the drawing and MI
- Assemble wires and bulkhead per drawing and MI
- Train others when needed
- Solder wires for assembly
- Complied with company and OSHA safety rules and regulations
- Read and interpreted blueprints and schematics for production runs
- Assembled and aligned parts and fixtures using hand and power tools
- Kept work areas organized, tidy and clean for maximum productivity
- Inspected all work for quality and compliance with design standards
- Performed assembly of products according to specifications and instructions
- Worked directly with QA personnel to identify and correct defects
- Created labels and packaging using label making software and label machines
- 704-604-0671 kimreed346@yahoo.com
- Planned and paced work efficiently in order to meet daily, weekly, project or production goals
- Verified part numbers and placed parts in appropriate shipping containers
- Built containers and packed parts in accordance with detailed packing specifications
- Completed daily orders with expert packing of shipments.
Assembler - Painter/Packer
Boston Gear
02.2018 - 11.2018
- Assemble product according to established methods, procedures and standards
- Sub-assemble in-put and out-put shafts
- Use air impact wrenches, assorted hand tools, drivers and protective leaders
- Thoroughly inspect each completed unit to assure correct projection and completed assembly
- Test each unit to make sure it is working properly
- Prepare units for painting by ensuring all shafts are masked from the paint process
- Perform painting process for completed units
- Inspect units to ensure that the unit is painted according to standards
- Package painted units and ensure that all units are packed correctly, to include accurately matching labels to units
- Protected materials for transport by correctly packaging products in boxes and crates
- Complied with safety, health and environmental regulations as prescribed by law
- Performed required housekeeping to keep work areas clean such as sweeping floors, putting trash in trash containers and picking up product from floor
- Monitored outgoing packages for proper labels and accurate address information
- Lifted and unloaded containers of parcels onto equipment for transportation to sort stations.
Technician II
UTC Aerospace System / Collins Aerospace
01.2016 - 08.2017
- Responsible for manufacturing and assembling cartridge power devices
- Vibro Etch manufacturing date and serial number on part
- Quality check for defective parts
- Put cartridge in serial number order
- Assemble cartridge in test block and make sure cartridge pass test before moving to next step
- Sand blast parts before it get bridge wire
- Operate machine to spot weld cartridge parts
- Maintained quality assurance and customer satisfaction objectives
- Organized work to meet demanding production goals
- Conducted tests of components and systems to evaluate performance and identify concerns
- Kept work consistently compliant with 5S standards.
Technician II - Assembly/ Labeler / Leak Tester
UTC Aerospace System / Collins Aerospace
03.2011 - 01.2016
- Halon and Helium leak test before labeling extinguishers
- Quality check for defective parts
- Assemble cartridge to discharge heads
- Make identification plate and assemble them on extinguishers
- Meet customer deadlines and expectations for extinguisher
- Paint fire extinguishers
- Communicate with team and let them know what had to get out for the day
- Train new workers when needed
- Had leadership responsibility
- Calibrate and Monitored machines during operation to detect sounds of malfunction or excessive vibration and adjusted machines to eliminate problems
- Proved successful working within tight deadlines and fast-paced atmosphere
- Used critical thinking to break down problems, evaluate solutions and make decisions.
Technician II - Electronic Assembler / Tester
UTC Aerospace System / Collins Aerospace
02.2009 - 03.2011
- Assemble stand-off, board unit, & coat circuit board
- Assemble TWV units
- Test unit after assembling
- Make epoxy and put epoxy into unit to secure part from leaks
- Coating circuits boards to keep them from shorting out
- Executed entire assembly process by accurately interpreting set-up sheets, work orders, drawings or blueprints
- Tested electrical controls and components on lines to identify conformance issues
- Assembled components with minimal supervision, exceeding expected project milestones
- Completed durable assemblies and subassemblies with hand and power tools
- Disassembled, reassembled and corrected changeover
- Conducted quality assurance inspections on finished components and identified issues.
Technician II - Assembler / Welder
Manpower, UTC Aerospace System / Collins Aerospace
01.2007 - 02.2009
- Assemble components for fire protection and safety systems parts specifically designed for civilian and military aircraft
- Spot weld and sand-blast inserts according to standards
- Quality check for defective parts
- Execute mandatory push-pull testing procedures for quality assurance
- Paint inserts and size them before moving to the next step
- Organized work to meet demanding production goals
- Conducted tests of components and systems to evaluate performance and identify concerns
- Kept work consistently compliant with 5S standards
- Maintained quality assurance and customer satisfaction objectives
- Implemented, configured and optimized safety standards.
Education
High School Diploma -
Wilson Tech Community College
Wilson, NC 2789311.2002
Skills
- Interpret blueprint
- Machine operator
- Halon leak test Certified
- Helium leak test Certified
- Solder Certified
- Federal explosive license
- Spot weld small components
- Use hoist / cranes
- Basic computer skills
- Mechanical Assembly
- Electrical Wiring
- Hand tool use
- Pneumatic tool use
- Manufacturing background
- Painting skills
- Quality Assurance
Certification
Licensed IPC J-STD-001 - 06/21 06/2023
Timeline
Assembly Technician III
Bosch Rexroth Corporation
09.2022 - Current
Assembly Tech III - Assembler/ Packer
Chemring Detection Systems
11.2018 - 09.2022
Assembler - Painter/Packer
Boston Gear
02.2018 - 11.2018
Technician II
UTC Aerospace System / Collins Aerospace
01.2016 - 08.2017
Technician II - Assembly/ Labeler / Leak Tester
UTC Aerospace System / Collins Aerospace
03.2011 - 01.2016
Technician II - Electronic Assembler / Tester
UTC Aerospace System / Collins Aerospace
02.2009 - 03.2011
Technician II - Assembler / Welder
Manpower, UTC Aerospace System / Collins Aerospace
01.2007 - 02.2009
High School Diploma -
Wilson Tech Community College
Similar Profiles
Reese MillerReese Miller
Assembly Line Worker at Bosch Rexroth CorporationAssembly Line Worker at Bosch Rexroth Corporation
Bismark Frimpong AidooBismark Frimpong Aidoo
Hydraulic Hose Technician at Bosch Rexroth Ghana ( Ashante Gold Corporation )Hydraulic Hose Technician at Bosch Rexroth Ghana ( Ashante Gold Corporation )
Deepika ChandreshDeepika Chandresh
Assistant business controller at Rexroth BoschAssistant business controller at Rexroth Bosch