MARISOL SANDINO
Charleston
Summary
Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.
Overview
26
26
years of professional experience
Work History
MRB Quality
GLOBAL SUPERIOR PERSONNEL (DAHER AEROSPACE)
11.2020 - 01.2025
- Performed inspections on assembly of Wing Center Tank, Section 48, Flaps, Ailerons and Horizontal Stabilizers
- Shakedown prior to moving to the next assembly position, or prior to customer delivery
- Reviewed non-conformance documents to look for possible mistakes during the generation
- Routed non-conformance documents to engineering for rework disposition, or to Quality Assurance to be corrected
- Accomplished work using details in installation drawings and specifications
- Document/tag writer for non-conformances in product assembly
- Support production in decisions taking about manufacturing processes in assembles with nonconformances documents to make it flow
- Processed MRB Disposition into Rework Assembly Work Orders (RAWO), as well Part Rework Authorization (PRA) work orders for manufacturing and suppliers / Scrap, Replace and Rework (SRR)
MRB Quality
JOHNSON SERVICES GROUP (BOMBARDIER)
TX
08.2018 - 09.2020
- Processed MRB Disposition into Rework Assembly Work Orders (RAWO), as well Part Rework Authorization (PRA) work orders for manufacturing and suppliers
- Reviewed non-conformance documents through CATIA V5, verifying thickness, measurements, Part Numbers, (x,y,z) locations, correct drawing revision and routed them to engineering for rework disposition or to Quality Assurance to be corrected
- Worked as a tag writer to address non-conformances found in product during the assembly or at final inspections before delivery
- Performed general inspections on aircraft wings subassemblies and assemblies
- Quality first time yield by being part of root cause corrective action process, performing inspection to present to customer
QA & Customer Support Inspector
JOHNSON SERVICES GROUP (TRIUMPH)
OK
10.2017 - 06.2018
- Performed inspections of assemblies and subassemblies, cleaning and wing body/confine spaces sealing; as well inspections about drilling, hole check, parts, and fasteners installation on aluminum; measurement of fasteners flushness
- Performed proper documentation to address discrepancies issues
- Performed final inspections as CSI prior to delivery
Quality Inspector
PLANETECHS (GKN AEROSPACE)
SC
02.2017 - 04.2017
- Inspected fabrication of engine injet lip skins
- Grinded, sanded and polished by hand or power tools as well as surfaces prior to painting
- Verified quality of finished work pieces comparing them to templates, measuring or mapping their dimensions with UT gages and micrometers to check thickness tolerances
- Documented defects found during the manufacturing process
Quality Inspector
PLANETECHS (BOEING)
SC
01.2014 - 12.2016
- Performed aircraft inspection of assemblies and subassemblies, cleaning and body, fuel tank and confine spaces sealing, as well inspections about drilling on composite, titanium and aluminum, hole check, parts and fasteners installation, composite repair, ducts, and blankets installation, wiring installation, fiber optic cleaning and light loss test, electrical connector installation, ground block installation, bond and ground installation, Installation of Interiors
- Sanding, polishing, and painting work
- QA inspections and implementing quality plans, programs, and procedures
- Final assembly and delivery inspections; calibration recall and records; perishable material receiving inspection
- Process manual using Catia V5
Lead/Supervisor
PLANETECHS (BOEING)
SC
06.2010 - 12.2013
- Leaded company projects in PPP (Product Protection Program), composite repairs, insulation blankets repairs and installation
- Performed '3 days ahead schedule work orders completion' giving an ECD (Estimate Completion Date)
- Assigned committed work orders to technicians in a daily basis
- Performed and tracking parts and fasteners orders
- Provided turn-over reports to all areas and to the upper management including the request for help needed to be able to complete work orders on time during the work week
- Solved customer discrepancies found prior to final assembly and delivery
Structures Mechanic
PLANETECHS (BOEING)
SC
05.2009 - 05.2010
- Performed sealant work in body, fuel tank and confined spaces
- Performed drilling, reaming, deburring of holes, installation of parts and fasteners
- Performed System works like installation of electrical components, ECS Ducts, Jumper/ bonding ground wires, ground blocks, and resistance checks
- Wiring installation
- Installation of Floor panels
- Installation of Interiors like Carpet, Sidewalls, Galleys, Lavatories, Overhead luggage compartments, Seats, Closets, Stowage boxes, celling panels
Structures Mechanic
STROM AVIATION (TIMCO)
NC
01.2008 - 12.2008
- Performed Heavy-Checks
- Remove, fabrication and installation of skins, doublers, frames, stringers, and seat tracks; remove, relocation and reinstallation of parts using appropriate hardware; major and minor composite repairs; drilling, reaming and installation of new parts; grinding and polishing, corrosion control of parts
Structures Mechanic
AVIATION PARTNERS (TIMCO)
NC
06.2006 - 12.2007
- Performed Heavy-Checks
- Open and close horizontal stabilizer panels; wing to body repairs, cabin, and cargo pits; sealant works; remove and relocation overhead bins tie rod brackets and monuments supports; honeycomb panel repairs, belly skin remove, fabrication and installation; TCAS installation; grinding, polishing and painting of parts; stringer and floor beams repair
Structures Mechanic
ATS RELIANCE (TIMCO)
NC
09.2004 - 05.2006
- Performed B, C, D-Checks
- Remove, fabrication and installation of floor panels and guil liners; installation of lavatories, galleys, closets, sidewall panels, seats, ceiling panels, fiber glass repairs; honeycomb panels replacement; grinding and polishing, corrosion remove, treatment, primer, and paint; doublers fabrication and installation; cabin modifications
Structures Mechanic
SMART (TIMCO)
NC
07.2003 - 08.2004
- Performed C, Heavy-Checks
- Bulkhead skin repairs, seat tracks remove, fabrication and installation; cargo pit repairs; composite works; drilling and installation of new parts; wing to body repairs and sealant work
Quality Inspector
CONDOR AIRCRAFT
MIAMI
01.1999 - 12.2002
- Performed inspections on B, C-Checks
- Light to medium floor beam repairs; insulation blankets; gill liners; floorboard removals, repair, fabrication, and installation; TCAS repairs; CIC application; fuel tank repairs
- Sealant application in fuel tank and confine spaces
- Works related to grinding, polishing, and painting of parts
Education
MECHANICAL ENGINEERING DEGREE -
ECPI University
Virginia Beach, VA05.2022
College credits -
Guilford Technician Community College
Jamestown, NC12.2007
HSD -
Barbara Goleman Senior
Miami Lakes, FL06.1998
Skills
More than 20 years’ experience in the Aerospace Industry excelling as Mechanic, Assembler, Production Supervisor, Quality Inspector, Quality Engineer
Experience in Structures, Wing to body Assembly; Interiors Fabrication and Installation; Systems; Wiring; Composite Fabrication and Repair; Sealant; Paint Shop; Production Test and Leadership
Full understanding of engineering drawings, blueprints, quality procedures and instructions, manufacturing specifications and procedures, operation and work sheets, and electronic data
Inspections to ensure First Pass Quality (FPQ) is attained by engineering drawings and specifications
Assistance in performing system & sub-system pre-delivery inspections and aircraft maintenance in preparation for delivery Paint shop inspections
Experience with QA test procedures requiring any inspection of parts and assemblies, including processes, materials, and flight line
Perform conformity/first article inspections to ensure compliance with procedures
Perform auditing, surveillance and monitoring of processes and procedures
Verify and ensure FAA compliance with Quality Management System
Experience using strong analytical and problem-solving skills
Ability to read and understand technical documents, interpret metric system, technical information from work instructions, drawings, standards and specifications
Ability in use of precision measuring instruments such as ball gauges, digital diameter tester, height gauges, thread gages, dial indicators, pana-metrics (electronic thickness tester), micrometers, calipers, drop indicators, comparator, and other inspection tools to check in performing assigned quality tasks, workmanship issues, fit, alignment and conformance per applicable drawing required
Strong experience in create non-conformances documents and Emergent Events related to nonconformances in planning and workmanship
Professionally execute technical reports of quality deviations for engineering analysis
Experience in manufacturing environment performing root, mistake proofing, cause analysis, implementing effective corrective action, and project management tasks
General knowledge of Lean Manufacturing principles Team Leadership (Formal/Informal) experience
Experience with leading production systems and the manufacturing/support environment
Knowledge of MS office products (Word, Excel, and PowerPoint)
Technical knowledge with drawings/CATIA V5, documents, process specifications, quality control requirements, and software programs REDARs, CMES, Velocity and generation of EPDs (PU, CI, NC, CA)
FCC License
Additional Information
Available to travel in and out of the United States of America., US Passport on hand
Timeline
MRB Quality
GLOBAL SUPERIOR PERSONNEL (DAHER AEROSPACE)
11.2020 - 01.2025
MRB Quality
JOHNSON SERVICES GROUP (BOMBARDIER)
08.2018 - 09.2020
QA & Customer Support Inspector
JOHNSON SERVICES GROUP (TRIUMPH)
10.2017 - 06.2018
Quality Inspector
PLANETECHS (GKN AEROSPACE)
02.2017 - 04.2017
Quality Inspector
PLANETECHS (BOEING)
01.2014 - 12.2016
Lead/Supervisor
PLANETECHS (BOEING)
06.2010 - 12.2013
Structures Mechanic
PLANETECHS (BOEING)
05.2009 - 05.2010
Structures Mechanic
STROM AVIATION (TIMCO)
01.2008 - 12.2008
Structures Mechanic
AVIATION PARTNERS (TIMCO)
06.2006 - 12.2007
Structures Mechanic
ATS RELIANCE (TIMCO)
09.2004 - 05.2006
Structures Mechanic
SMART (TIMCO)
07.2003 - 08.2004
Quality Inspector
CONDOR AIRCRAFT
01.1999 - 12.2002
MECHANICAL ENGINEERING DEGREE -
ECPI University
College credits -
Guilford Technician Community College
HSD -
Barbara Goleman Senior